Pruners¶

class
optuna.pruners.
BasePruner
[source]¶ Base class for pruners.

prune
(study, trial)[source]¶ Judge whether the trial should be pruned based on the reported values.
Note that this method is not supposed to be called by library users. Instead,
optuna.trial.Trial.report()
andoptuna.trial.Trial.should_prune()
provide user interfaces to implement pruning mechanism in an objective function.Parameters:  study – Study object of the target study.
 trial – FrozenTrial object of the target trial.
Returns: A boolean value representing whether the trial should be pruned.


class
optuna.pruners.
MedianPruner
(n_startup_trials=5, n_warmup_steps=0, interval_steps=1)[source]¶ Pruner using the median stopping rule.
Prune if the trial’s best intermediate result is worse than median of intermediate results of previous trials at the same step.
Example
We minimize an objective function with the median stopping rule.
>>> from optuna import create_study >>> from optuna.pruners import MedianPruner >>> >>> def objective(trial): >>> ... >>> >>> study = create_study(pruner=MedianPruner()) >>> study.optimize(objective)
Parameters:  n_startup_trials – Pruning is disabled until the given number of trials finish in the same study.
 n_warmup_steps – Pruning is disabled until the trial reaches the given number of step.
 interval_steps – Interval in number of steps between the pruning checks, offset by the warmup steps. If no value has been reported at the time of a pruning check, that particular check will be postponed until a value is reported.

class
optuna.pruners.
NopPruner
[source]¶ Pruner which never prunes trials.
Example
>>> from optuna import create_study >>> from optuna.pruners import NopPruner >>> >>> def objective(trial): >>> ... >>> >>> study = create_study(pruner=NopPruner()) >>> study.optimize(objective)

class
optuna.pruners.
PercentilePruner
(percentile, n_startup_trials=5, n_warmup_steps=0, interval_steps=1)[source]¶ Pruner to keep the specified percentile of the trials.
Prune if the best intermediate value is in the bottom percentile among trials at the same step.
Example
>>> from optuna import create_study >>> from optuna.pruners import PercentilePruner >>> >>> def objective(trial): >>> ... >>> >>> study = create_study(pruner=PercentilePruner(25.0)) >>> study.optimize(objective)
Parameters:  percentile – Percentile which must be between 0 and 100 inclusive (e.g., When given 25.0, top of 25th percentile trials are kept).
 n_startup_trials – Pruning is disabled until the given number of trials finish in the same study.
 n_warmup_steps – Pruning is disabled until the trial reaches the given number of step.
 interval_steps – Interval in number of steps between the pruning checks, offset by the warmup steps. If no value has been reported at the time of a pruning check, that particular check will be postponed until a value is reported. Value must be at least 1.

class
optuna.pruners.
SuccessiveHalvingPruner
(min_resource='auto', reduction_factor=4, min_early_stopping_rate=0)[source]¶ Pruner using Asynchronous Successive Halving Algorithm.
Successive Halving is a banditbased algorithm to identify the best one among multiple configurations. This class implements an asynchronous version of Successive Halving. Please refer to the paper of Asynchronous Successive Halving for detailed descriptions.
Note that, this class does not take care of the parameter for the maximum resource, referred to as \(R\) in the paper. The maximum resource allocated to a trial is typically limited inside the objective function (e.g.,
step
number in simple.py,EPOCH
number in chainer_integration.py).Example
We minimize an objective function with
SuccessiveHalvingPruner
.>>> from optuna import create_study >>> from optuna.pruners import SuccessiveHalvingPruner >>> >>> def objective(trial): >>> ... >>> >>> study = create_study(pruner=SuccessiveHalvingPruner()) >>> study.optimize(objective)
Parameters:  min_resource –
A parameter for specifying the minimum resource allocated to a trial (in the paper this parameter is referred to as \(r\)). This parameter defaults to ‘auto’ where the value is determined based on a heuristic that looks at the number of required steps for the first trial to complete.
A trial is never pruned until it executes \(\mathsf{min}\_\mathsf{resource} \times \mathsf{reduction}\_\mathsf{factor}^{ \mathsf{min}\_\mathsf{early}\_\mathsf{stopping}\_\mathsf{rate}}\) steps (i.e., the completion point of the first rung). When the trial completes the first rung, it will be promoted to the next rung only if the value of the trial is placed in the top \({1 \over \mathsf{reduction}\_\mathsf{factor}}\) fraction of the all trials that already have reached the point (otherwise it will be pruned there). If the trial won the competition, it runs until the next completion point (i.e., \(\mathsf{min}\_\mathsf{resource} \times \mathsf{reduction}\_\mathsf{factor}^{ (\mathsf{min}\_\mathsf{early}\_\mathsf{stopping}\_\mathsf{rate} + \mathsf{rung})}\) steps) and repeats the same procedure.
 reduction_factor –
A parameter for specifying reduction factor of promotable trials (in the paper this parameter is referred to as \(\eta\)). At the completion point of each rung, about \({1 \over \mathsf{reduction}\_\mathsf{factor}}\) trials will be promoted.
 min_early_stopping_rate –
A parameter for specifying the minimum earlystopping rate (in the paper this parameter is referred to as \(s\)).
 min_resource –

class
optuna.pruners.
HyperbandPruner
(min_resource=1, reduction_factor=3, n_brackets=4, min_early_stopping_rate_low=0)[source]¶ Pruner using Hyperband.
As SuccessiveHalving (SHA) requires the number of configurations \(n\) as its hyperparameter. For a given finite budget \(B\), all the configurations have the resources of \(B \over n\) on average. As you can see, there will be a tradeoff of \(B\) and \(B \over n\). Hyperband attacks this tradeoff by trying different \(n\) values for a fixed budget. Note that this implementation does not take as inputs the maximum amount of resource to a single SHA noted as \(R\) in the paper.
Note
 In the Hyperband paper, the counterpart of
RandomSampler
is used.  Optuna uses
TPESampler
by default.  The benchmark result
shows that
optuna.pruners.HyperbandPruner
supports both samplers.
Note
If you use
HyperbandPruner
withTPESampler
, it’s recommended to consider to set largern_trials
ortimeout
to make full use of the characteristics ofTPESampler
becauseTPESampler
uses some (by default, \(10\))Trial
s for its startup.As Hyperband runs multiple
SuccessiveHalvingPruner
and collect trials based on the currentTrial
’s bracket ID, each bracket needs to observe more than \(10\)Trial
s forTPESampler
to adapt its search space.Thus, for example, if
HyperbandPruner
has \(4\) pruners in it, at least \(4 \times 10\) pruners are consumed for startup.Parameters:  min_resource – A parameter for specifying the minimum resource allocated to a trial noted as \(r\)
in the paper.
See the details for
SuccessiveHalvingPruner
.  reduction_factor – A parameter for specifying reduction factor of promotable trials noted as
\(\eta\) in the paper. See the details for
SuccessiveHalvingPruner
.  n_brackets – The number of
SuccessiveHalvingPruner
s (brackets). Defaults to :math`4`. See https://github.com/optuna/optuna/pull/809#discussion_r361363897.  min_early_stopping_rate_low – A parameter for specifying the minimum earlystopping rate. This parameter is related to a parameter that is referred to as \(r\) and used in Asynchronous SuccessiveHalving paper. The minimum early stopping rate for \(i\) th bracket is \(i + s\).
 In the Hyperband paper, the counterpart of